film capacitors ? power electronic capacitors general purpose applications series/type: mkp ac hp ordering code: b2536* date: may 2012 version: 2 ? epcos ag 2012. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! please fill in the table and then change the color to "white". this ensures that the table disappears (invisible) for the customer pdf. don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! identification/classification 1 (header 1 + top left bar): film capacitors ? power electronic capacitors identification/classification 2 (header 2 + bottom left header bar): general purpose applications ordering code: (top right header bar) b2536* series/type: (bottom right header bar) mkp ac hp preliminary data (optional): (if necessary) department: film p pm date: may 2012 version: 2
film capacitors ? power electronic capacitors b2536* general purpose applications mkp ac hp film p pm may 2012 please read cautions and warnings and page 2 of 8 important notes at the end of this document . construction and general data ? metallized polypropylene film capacitors ? aluminum case for gener al purpose applications ? oil filling: castor oil ? safety device: overpressure disconnector, self-healing technology ? mounting and grounding: stud on bottom of aluminum can ? cooling: naturally air-cooled (or forced air cooling) ? degree of protection: indoor mounting ? pollution degree: pd4 test data voltage between terminals v tt 1.5 ? v rms , 60 s voltage between terminals and aluminium canv tc 3000 v ac rms , 10 s dissipation factor tan (100 hz) 1.0 10 -3 life test iec 61071 life expectancy up to 100 000 hours for v rms | c/c| 3% characteristics rated capacitance c n 10 ? 150 f tolerance 5% connection m10 terminals rated ac voltage v rms 550 v 640 v 780 v 1000 v rated dc voltage v r 780 v 900 v 1100 v 1400 v repetitive peak voltage v i 910 v 1060 v 1290 v 1650 v non repetitive peak voltage v s 1800 v 2100 v 2600 v 3300 v
film capacitors ? power electronic capacitors b2536* general purpose applications mkp ac hp film p pm may 2012 please read cautions and warnings and page 3 of 8 important notes at the end of this document . *considering mounting position with terminals to the top. for other mounting position, please request evaluation. **maximum temperature allowed at the capacitors hot spot reference standards iec 61071 certification: ul 810-5th edition dimensional drawing m10 screw terminal climatic category 40/70/21 minimum temperature min. ?40 c maximum temperature max.* +60 oc storage temperature stg ?40 oc ? +85 oc maximum hotspot temperature hs** +70 oc humidity 95% (t test = 21 days) maximum altitude 2000 m above sea level design data dimensions (d x h) according to specification table weight approx. according to specification table impregnation castor oil, non pcb fixing threaded bolt m12 max. torque m12: 12 nm max. torque m10: 10 nm mounting position upright
film capacitors ? power electronic capacitors b2536* general purpose applications mkp ac hp film p pm may 2012 please read cautions and warnings and page 4 of 8 important notes at the end of this document . terms and formulas maximum current i max the maximum rms current for continuous operation maximum peak current ? the maximum current amplitude which occurs instantaneously during continuous operation. the maximum peak current (?) and the maximum rate of voltage rise (dv/dt) max on a capacitor are related as follows: ? = c (dv/dt) max maximum surge current i s the admissible peak current induced by a switching or any other disturbance of the system which is allowed for a limited number of times. i s = c (dv/dt) s maximum duration: 50 ms/pulse maximum number of occurrences: 1000 (during load) series resistance r s the series resistance of a capacitor is the result of t he resistive losses that occu r in the electrodes, in the contacting and in the inner wiring. the series resistance rs generates the ohmic losses (i 2 .rs) in a capacitor, and it is largely independent of frequency. self-inductance l self the self-inductance is produced by the inductance of the terminals and the windings. with self-inductance, it is possible to determine the resonance frequency. c l f self 2 1 =
film capacitors ? power electronic capacitors b2536* general purpose applications mkp ac hp film p pm may 2012 please read cautions and warnings and page 5 of 8 important notes at the end of this document . specifications and ordering codes v rms c f i max a ? ka i s ka d mm h mm weight kg ordering code 33 45 1.9 5.6 75 115 0.6 B25360a5336j050 47 50 1.9 5.7 75 140 0.8 B25360a5476j050 68 50 3.8 11.6 75 195 1.1 B25360a5686j050 95 60 3.8 11.5 75 245 1.5 B25360a5956j050 130 60 5.2 15.7 85 245 1.6 B25360a5137j050 550 150 60 5.2 15.8 85 270 1.7 B25360a5157j050 22 40 1.5 4.5 75 115 0.7 B25360a6226j040 33 45 1.6 4.8 75 140 0.8 B25360a6336j040 50 50 3.2 9.6 75 195 1.1 B25360a6506j040 68 60 3.3 9.8 75 245 1.4 B25360a6686j040 90 60 4.3 13.1 85 245 1.6 B25360a6906j040 640 100 60 4.2 12.6 85 270 1.8 B25360a6107j040 15 35 1.2 3.6 75 115 0.7 B25360a7156j080 22 40 1.2 3.7 75 140 0.8 B25360a7226j080 33 50 2.6 7.9 75 195 1.1 B25360a7336j080 47 55 2.6 7.9 75 245 1.4 B25360a7476j080 780 75 60 3.7 11.1 85 270 1.7 B25360a7756j080 10 30 1.2 3.6 75 115 0.7 B25360a1106j100 20 40 1.5 5.0 75 140 0.8 B25360a1206j100 33 50 2.9 8.7 75 245 1.4 B25360a1336j100 47 60 4.1 12.4 85 245 1.6 B25360a1476j100 1000 55 60 4.3 12.8 85 270 1.7 B25360a1556j100
film capacitors ? power electronic capacitors b2536* general purpose applications mkp ac hp film p pm may 2012 please read cautions and warnings and page 6 of 8 important notes at the end of this document . cautions and warnings ? in case of dents of more than 1 mm depth or any ot her mechanical damage, capacitors must not be used at all. this applies also in cases of leakage. ? to ensure the full functionality of the overpressure disconnector, elastic elements must not be hindered and a minimum space of 12 mm has to be kept above each capacitor. ? check tightness of the connections/terminals periodically. ? the energy stored in capacitors may be lethal. to prev ent any chance of shock, discharge and short-circuit the capacitor before handling. ? failure to follow cautions may result, worst case, in premature failures, bursting and fire. ? epcos ag is not responsible for any kind of possibl e damages to persons or things due to improper installation and application of capacitors for power electronics. safety ? electrical or mechanical misapplication of capacitors may be hazardous. personal injury or property damage may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical disruption of the capacitor. ? ensure good, effective grounding for capacitor enclosures. ? observe appropriate safety precautions during ope ration (self-recharging phenomena and the high energy contained in capacitors). ? handle capacitors carefully , because they may still be char ged even after disconnection. ? the terminals of capacitors, connected bus bars and c ables as well as other devices may also be energized. ? follow good engineering practice. thermal load after installation of the capacitor it is necessary to veri fy that maximum hot-spot temp erature is not exceeded at extreme service conditions. mechanical protection the capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided. storage and operating conditions do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. in dusty environments regula r maintenance and cleaning especially of the terminals is required to avoid conductive path bet ween phases and/or phases and ground. the maximum storage temperature is 85 c.
film capacitors ? power electronic capacitors b2536* general purpose applications mkp ac hp film p pm may 2012 please read cautions and warnings and page 7 of 8 important notes at the end of this document . overpressure disconnector to ensure full functionality of an overpressure di sconnector, the following must be observed: 1. the elastic elements mu st not be hindered, i.e. ? connecting lines must be flexible leads (cables). ? there must be sufficient space fo r expansion above the connections. ? folding crimps must not be retained by clamps. 2. stress parameters of the capacitor must be within the iec61071 specification. service life expectancy electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors, too. the maximum service life expectancy may vary depending on the application the capacitor is used in.
important notes page 8 of 8 the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons , it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must theref ore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for products and services in the electrical industry? published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, si p5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
